ACME Systems Acqua A5 Running Poky linux built with Yocto

We have just completed the with 4.3″ LCD and resistive touchscreen.
CPU Atmel SAMA5D3 mounted on Acqua A5 module.
Software demo: Qt5 based home automation demo.

Photos and video

ACME Berta A5 Yocto Project

 

Board Main features

  • Atmel MPU SAMA5D31 Cortex-A5 @ 536MHz
  • 256MByte DDR2 RAM @ 32 bit (optional 512MB)
  • Embedded µSD hinge type holder for OS and data
  • Optional 256 MByte of NAND FLASH on board
  • Atmel AT24MAC402 on-board:
  • Factory-Programmed unique EUI-48 address
  • I2C-Compatible (2-wire) 2-Kbit Serial EEPROM
  • Embedded Unique 128-bit Serial Number
  • 10/100 Mbit ethernet I/F (can be turned off for power saving)
  • Three USB Host ports (one configurable as USB device)
  • Integrated 24 bit LCD controller and resistive touch panel I/F
  • Four status leds
  • Single power supply at 3.3 Volt DC
  • Three 50-pin connectors pitch 1.27 mm (50 mils)
  • Floating Point Unit
  • Low power consumption and low EMI
  • RoHS compliant
  • Commercial (-0 +70 °C) or Extended (-25 +85 °C) temp. range
  • Size: 53 x 53 mm (2.09×2.09 inches), weight: 14g
  • Placement for metal shield for harsh environment
  • AES/DES encryption engine
Share this post: